TS-LB Manual of O B light
Use for Tower (electricity, communications, microwave, etc.), chimney (thermal power plants, coking plants, chemical plants, etc.), high-rise buildings, large bridges, large port machinery, large-scale construction machinery, wind turbines and other needs of the aircraft served as a warning of occasion.
Type: TS- LB
一、Application:
Use for Tower (electricity, communications, microwave, etc.), chimney (thermal power plants, coking plants, chemical plants, etc.), high-rise buildings, large bridges, large port machinery, large-scale construction machinery, wind turbines and other needs of the aircraft served as a warning of occasion.
二、Main functions and Features
• With fresnel lens lampshade, High light utilization and the beam can be effectively controlled within the required range
• Based LED technology, long life and low energy efficiency
• Lampshade is made of PC material, which is anti-bird sharp, good impact strength, thermal stability and flame retardancy
• Lampshade and base are connected to the base of the cover along, which is better waterproof performance, Please find the photo view
• Aluminum alloy base material, light weight and good corrosion resistance
• Use the base flange, the mounting holes is the semi-circular hole (F28 * 9mm) and easy to install
• Electromagnetic compatibility characteristics of the circuit, and use LED constant current drive to extend
LED life
• Aviation obstruction lights with light control, fault detection and alarm function
•• Aviation obstruction light is steady burning with red
• It keeps stable and low maintenance costs.
三、 Main Technical Data
Standard |
ICAO (No. 14 Riders) low light intensity Obstruction light standards and FAA-L810 Category
|
Vertical Beam Angle |
≥10°
|
Source Type |
LED
|
Horizontal Viewing angle |
360°
|
Emitting Color |
Red (if needs special color, can be customized)
|
Flash frequency |
Steady burning
|
Operating Voltage |
AC110V—AC240V
|
LED Lifespan |
≥100000 Hours
|
Power Consumption |
6W
|
Illumination |
500Lux
|
Effective light intensity |
≥32.5cd
|
The maximum wind speed |
≥50m/s
|
Operating Temperature |
-40˚C — +70˚C
|
Protection class |
IP65
|
Humidity |
10% — 95% (Non-condensing)
|
Weight |
0.9kg |
Material |
Base: Aluminum. Light Shade: PC (polycarbonate) |
四、Aviation obstacle lights installation steps:
1、Ensure the supply voltage meet the rated voltage of lighting
2、Use M8 bolts fixed the light on the bracket of tower;
3、Aviation obstruction lights its own connecting cable and terminals (Black and Red). Please find below photo view. Wire connects to terminals (black and red) on one end. Another end will connect to wire of power supply at site
4. One end of terminal will connect to cable of power supply at site, Following is steps
For example, Red terminals connection
4.1 Stripping cable
4.2 Put the wire with bare copper into the terminals and pinch tightly
Do same procedure on black terminal to connect wire of power supply at site
5、When cable connection is completed for both black and red terminals, use pliers clamp terminals
6、After completion of the connection, the terminals respectively put from waterproof connector into the lamp body. Please find below photo view
7、Put the cable with protective cover into lamp body through waterproof connectors then tighten the waterproof connectors, Wiring is completed connection and light can work with power supply