I．Product Structure and Operating Principle

TS-SL medium-intensity aviation obstruction light is the latest generation of aviation obstruction light which is manufactured in strict accordance with the requirements and standard set forth the fourteenth volume in the standard attachment of ICAO, the China’s Civil Aviation Industry Standard MH/T6012-1999 and FAA.
The aviation obstruction light is operated with 220V AC power as the power-generating system and high-power luminotron as the illuminant of which the lifetime can reach as long as 100,000 hours. If calculated by 10 hours of night illumination everyday, it can be used for more than 22 years.
The shell of aviation obstruction light is made up of PC and engineering plastics as well as die-casting aluminum. All the devices shall be packaged inside the light. The light is simple in structure and light in weight so it is shock resistance. It is controlled by photoelectricity which makes it to blink automatically in the night and shut off automatically in the daytime.

II. Technical Parameters

model	TS-SL
blinking frequency	20~60 times per minute
illuminate lifespan	100,000 hours
effective luminous intensity	2000cd±500cd
ambient temperature	-40 ºC ~ 70 ºC

III. Installation Size



There are four half-round holes, 15mm long and 15mm wide, for installation on the baseboard whose perimeter is the same with that of flange. The width of the baseboard is 8 mm and the total diameter is 130 mm. The center distance of mounting hole is up to 42.5 mm. when installed, the installation board shall be fixed with M10X40mm bolt.

IV. Instruction

1. The aviation obstruction light is equipped with 0.5 meter-long three core table, One red, black for the power cord ,Yellow, green for synchronous line，Armoured copper nets grounded.
2. If multiple lights blinking synchronously are needed, you shall install one photosensitive and connect the lines of the same color.