Type: TS-C-1

1、Application Area
Apply in controlling the switch of OB light & alarming when appearing OB light system fault.
2、Main Function & Characteristic
• Control the switch of one OB light.
• Test the working condition of OB light, and alarm when appearing OB light system fault.
• With lighting protection & electric leakage protection function.

Working voltage	AC11V-240V	Twinkle way	Always on
Qty of controlled OB light	1 PCS	Operate way	Light- operated
Optical illumination	70—100Lux(on-off)	Alarm output	Single way dry connect(relay) output
Protection grade	IP65	Material	Aluminium die casting
Working temperature	-30˚C — +70˚C	Working humidity	10%—95% (Non-coagulation)
Electrocircuit protection	Electric leakage protection	Lighting protection	With lighting protection function

4、Drawing Of Control Box



5、Method Of Installing
• Unscrewing the bolts from the top cover plate, take the top cover plate away and make the terminal blocks exposed.
• Fix the controller with 4 M8 nuts & bolts.



• Power line through the 1st waterproof connector to connect with the surge protective devices.
• Light-operated switch line through the 2nd waterproof connector to connect with the 1st &2nd terminals. (Attention: 1st: Anode & 2nd: Cathode)
• Alarm output line through the 3rd waterproof connector to connect with the 3rd &4th terminals
(Attention: 3rd: Anode & 4th: Cathode)
•OB light line through 4th waterproof connector to connect with the 5th & 6th terminal on the terminal blocks. (Attention Plus-n-Minus when the electricity is DC, 5th: Anode &6th: Cathode).
• Cover the top cover plate and use the bolts & nuts to fix it.
• Put the photosensitive control box in the place where light exposure.
• Connect electricity power after test.

6、Attention：

• Please follow the instruction of the specification.
• Please take attention the polarity of the power line & signal line when installing.